Only compatible with 3L gasoline cars. The item has just arrived. First, you should activate the flashlight to release any stored energy, then charge the device for over 4 hours before using it in the vehicle, as it contains residual power. This procedure can help prolong the product's lifespan!

1. It is advised to initiate the vehicle using a three-grid power source or a minimum of 60% power supply. 2. Ensure that the battery terminal is clean. 3. For a standard clamp start: Verify that the blue connector of the clamp is completely inserted, that the clamp makes maximum contact with both the positive and negative terminals of the battery, and that the clamp is secure and does not move.

Initially, attach the positive and negative clamps to the corresponding terminals of the battery, and allow a wait of 2 to 3 minutes before attempting to start the vehicle. This method helps to lessen the strain on the power source. Pre-usage advice: [1] If you cannot start the car continuously or keep the key turned, wait for 30 seconds between each attempt before trying to start again.

The positive and negative terminals must not be swapped. Do not connect two clips to create a short circuit. After successfully starting the vehicle, detach the clip within 30 seconds. Failing to adhere to these three guidelines could lead to the fuse box of the clip burning out. Please be cautious with the procedure.

1. Completely new
2. This item features advanced lighting technology, compact design, portable, lightweight, and high capacity.
3. Compatible with various models, 12V car emergency jump starter, high-discharge battery for easy ignition.
4. Includes a USB output port for charging smartphones, MP3 players, and other gadgets. 5. Comes with an LED flashlight for emergency situations.
Note: Ensure the red and black clips are connected properly; incorrect connections may lead to an explosion.

Attach the red clamp to the positive terminals of the car battery. Attach the black clamp to the negative terminals of the car battery.